Customer Update – Mark Davis

Mark Davis, from outside Melbourne, Australia, had a busy last winter building a very interesting and innovative carbon fiber guitar. He recently purchased a second EGS bridge, so I am looking forward to seeing what is in store. Mark is active at the Aussie Guitar Gear Heads forum and has a thread documenting this whole build there.

This guitar has a core of Australian pine-like wood King Billy and is fully carbon fiber. It has several fairly unique features, such as pickups mounted out of view from behind (to give an un-interrupted CF top) and glued on frets (again to not ruin the fibers of the CF weave).

Mark writes:

The total weight of this guitar is 1.3kg or 2.875lbs. Pickups are Adeson Icendiary in the bridge and a Fenton Weill in the mid position. Switching is single / single and split h/b in series , and bridge h/b. Frets are hardened SS and glued on. Nut is home made to suit purpose as are the knobs. I new exactly what I was aiming for from the beginning with the hidden P/U’s this was due to the fact that I wanted uninterrupted fibers running all the way to the bridge This creates the problem of getting the strings close to the body so as the P/U’s work. A simple mold was made that creates the top of the guitar, and a mold for the fret board. Its a piece of laminex bent and reinforced on the sides, with a bit of design work the center forms a 16 in radius. The rear of the blank was then laminated with a combination of uni and woven cloth. Peel ply was applied over to control wet out. The face will be laminated in the mold.

The Aussie Guitar Gear Heads forum thread documents the build steps and show off Mark’s impressive design skills and creative solutions.

Submit a Comment

Your email address will not be published. Required fields are marked *


*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>